You're in good hands with reliable

Products Range > Scaffolding & Accessories > Cuplock System & Jacks


Standard

Standard


RICSJ - 3001

The Pipe of Hot Rolled Steel
as per BS-1139 Standard.

Made from Pipe of
48mm OD, 4mm or 3.2mm and
available in lengths of 1mtr to 3mtr.

×
Ledger

Ledger


RICSJ - 3002

The Pipe of Hot Rolled Steel
as per BS-1139 Standard.

Made from Pipe of
48mm OD, 4mm or 3.2mm and
available in lengths of 1mtr to 3mtr.

×
Drop Head

Drop Head


RICSJ - 3003

The Main component of the Decking System, used over each
standard with a socket adoptor.

Made from Sheeted components,
The Critical Height is 70mm.

×
Base Plate

Base Plate


RICSJ - 3004

Made from Plate of
Low carbon steel to support the Standards and Ledgers.

Made from pipe of
38mm X 100mm, welded with a plate of 150 X 150 X 6 mm.

×
 
Fixed U Head

Fixed U Head


RICSJ - 3005

The Pipe of Hot Rolled Steel
as per BS-1139 Standard.

Made from 38mm X 4mm pipe,
100mm length , the size of U
is 150 X 170 X 125 X 100, 5, 6, 8 mm.

×
Socket Base

Socket Base


RICSJ - 3006

The Pipe of Hot Rolled Steel
as per BS-1139 Standard.

Made from 48.3mm X 3.2mm pipe,
the height is 100mm and the plate is 150 X 150 X 6.

×
Four Way Head

Four Way Head


RICSJ - 3007

Made from low carbon steel and used above the standard
to support the wooden I- Sections.

For 2 Beams of 80mm width.

×
Top Cup

Top Cup


RICSJ - 3008

Made from Malleable Casting.

Top Cup is available for the pipe of 48.3mm OD
and in 3lugs and 4lugs.

×
 
Bottom Cup

Bottom Cup


RICSJ - 3009

Made from Low Carbon Steel

Bottom Cup is available
for the pipe of 48.3mm OD.

×
Ledger Plate

Ledger Plate


RICSJ - 3010

Made from Forged Steel

Ledger Plate is available for
the pipe of 48.3mm OD.

×
Vertical/Standard (Open End)

Vertical/Standard (Open End)


RICSJ - 3011

Vertical/Standard (Open End)

Sizes : 1.00 mtr., 1.50 mtr., 1.80 mtr., 2.00 mtr., 2.30 mtr., 2.5 mtr., 3.00 mtr.,

×
Vertical Standard (With Rod Spogot End)

Vertical Standard (With Rod Spogot End)


RICSJ - 3012

Vertical Standard (With Rod Spogot End)

Sizes : 1.0 mtr., 1.3 mtr., 1.5 mtr., 1.8 mtr.,

×
 
Kwick Stage System

Kwick Stage System


RICSJ - 3013

Ledger

Sizes : 1.2 mtr., 1.8 mtr., 2.4 mtr.,

×
Gogo Clamp

Gogo Clamp


×
Single Clamp

Single Clamp


×
Pannel Wedge

Pannel Wedge


×
 
Universal Jack

Universal Jack


RICSJ - 3017

The Universal Jack provide 500mm fine & coarse adjustment at the top or bottom of a scaffold structure. It is used in Conjuction with Socket bases, U-Head and Drop head adaptor. It is manufacture in 38mm OD tube, 4mm wall thickness.

Size   : 660mm Long (500mm adjustment)
Cross : Hollow 38mm OD, Solid 36OD

×
Adjustable U Head

Adjustable U Head


RICSJ - 3018

The Adjustment 'U'-Head Jack is a upper component, which provides full 500mm of fine & coarse adjustment. This 'U'-Head jack is can be used with traditional timber, H20 Timber Beam, Support. 'U'-Head are designed to use with single or double nominal Timber and H20 Timber Beams. This 'U'-Head is welded with Universal jack to provide a 500mm fine & coarse adjustment.

Size : U-Head 90x150x150mm+660mm Long Jack
U-Head 180x150x150mm+660mm Long Jack

×
Swivel Jack

Swivel Jack


RICSJ - 3019

Made from Pipe joint with the plate with a fasteners so that we
can move the pipe in 180 degrees.

Made from pipe of
38mm X 4mm X 650mm Height

×
Adjustable Base Jack

Adjustable Base Jack


RICSJ - 3020

The Adjustable base Jack is a base component, which provides full 500mm of line & coarse adjustment. The base jack is have 5mm thick bearing plate welded to the end of universal jack. 40kn is a Safe working load on 500mm adjustment.

Size : 660mm long, Base 120x120x5mm
Cross Section : Hollow 38mm OD, Solid 36mm OD

×
 
Auto Parts             Scaffoldings & Formwork Accessories             Renewable Energy            Fasteners            Bio Gas CNG